Peavey PR12D Active Speaker

No other speaker line combines power and value as effectively as the Peavey PR Series.

No other speaker line combines power and value as effectively as the Peavey PR Series. In fact, enclosures with similar power points commonly sell for hundreds more than the PRs.

The Peavey PR 12D is a powered, bi-amplified, two-way speaker system engineered to provide very high levels of performance in a compact powered loudspeaker. The PR 12D is capable of up to 120 dB peak SPL. the enclosure utilizes tough polypropylene in an injection-molded plastic trapezoidal form, with a coated steel grille to offer an attractive yet-durable powered speaker system.

This two-way powered system is comprised of a 150 W class D power amplifier driving a 12" heavy duty woofer. The RX™ 14 compression driver is driven by a 50 W class D power amplifier and features a 1.4" titanium diaphragm coupled to an extremely smooth and well-controlled constant directivity horn (with a coverage pattern of 90" by 40") that is molded integrally into the enclosure. A balanced input to the preamp/EQ electronics consists of one combo female XLR and 1/4" TRS phone jack. It is switchable between mic-level and line-level sensitivity.

Two 1/4" phone jacks are provided for link-out / direct-in capability. The link-out is a post-level and pre-crossover. While the direct-in is a circuit pre-crossover input. A woofer servo senses back-EMF from the woofer voice coil that is not a result of the dirve signal, and subtracts the error so that the woofer cone follows the drive waveform precisely. constant Loudness (Fletcher-Munson) circuit for accentuating bass and treble at low listening volume levels.

The power amplifiers providing the bi-amplification are low-distortion units providing 150 W continuous RMS into the nominal 8 ohm load of the woofer, and a 50W continuous RMS into the nominal 8 ohm load of the tweeter. They were selected for their reliability and superb musical performance capability. both amplifiers feature out patented DDT™ compression, which virtually eliminates audible power amplifier clipping. A molded-in handle provides ease of transport, while multiple mounting points (top and bottom) for the Peavey Versamount™ allow maximum utility.

• Bi-amplified Class D powered system with 200 watt total power
• Both power amps have DDT compression
• 12" heavy duty woofer with 2.375" voice coil and Neodymium Magnet
• Woofer servo for reduced woofer distortion
• Automatic equal loudness (Fletcher-Munson)
• RX 14 1.4" titanium compression driver
• Peak SPL up to 120 dB with music!
• Combo jack with 1/4" TRS & female XLR mic- or line-level balanced input
• Two 1/4" phone jacks for link-out/direct-in capability
• Molded-in horn with exceptionally smooth response and pattern control
• Top and sides handgrips
• Pole mount molded-in
• Reduced weight
• Top and bottom flying point inserts
• Weight Unpacked: 28.66 lb(13 kg)
• Weight Packed: 34.39 lb(15.6 kg)
• Width Packed: 20.75"(52.705 cm)
• Depth Packed: 25.25"(64.135 cm)
• Height Packed: 16.25"(41.275 cm)

Peavey PR12D Active Speaker @ Electro Music.
Price: £375.00.

Special Order - delivery tbc