Yamaha MG82CX

4 XLR inputs, 1 stereo channel, effects send to internal digital effects with Free Delivery.

Small but Sophisticated These new MG mixers are lighter and smaller than ever while offering some innovative new features. The MG102C and MG82CX are ideal mixers for basic music production or live sound applications that require high sound quality from a relatively small number of input sources. Both models are remarkably compact and lightweight, but no compromises have been made in sound quality. They even have built-in channel compressors that, although easy to operate, can significantly enhance the quality of your mixes. An optional adaptor allows these mixers to be mounted on a microphone stand for easy access and convenient positioning on stage. The MG82CX additionally features top-quality SPX digital effects built in, so you won't need any extra equipment for many applications. Electrical Characteristics MIN TYP MAX UNIT Frequency Response ST OUT GAIN: min (CH 1-2, CH 3/4-5/6) 20Hz-20kHz, refer to the nominal output level @1kHz -3.0 1.0 dB AUX SEND (EFFECT SEND*) -3.0 1.0 MONITOR OUT, REC OUT -3.0 1.0 Total Harmonic Distortion(THD+N) ST OUT +14dBu, 20Hz-20kHz, Input Gain control at minimum 0.1 % Hum and Noise Hum and Noise are measured with a 6dB/octave filter @12.7kHz; equivalent to a 20kHz filter with infinite dB/octave attenuation. input: CH INPUT 1-2 MIC EIN (Equivalent Input Noise): Rs=150©, GAIN:max (CH1,2) -128 dBu ST OUT ST MASTER CONTROL at nominal level and all Ch level controls at minimum. -87 dBu AUX SEND (EFFECT SEND*) All Ch AUX controls at minimum -85 dBu ST OUT ST Master Control and one CH level control at nominal level (CH1,2) -64 dBu ST OUT Residual Output Noise -100 dBu Crosstalk (1kHz) Adjacent Input CH 1-2, 1kHz -70 dB Input to Output STEREO L/R, CH 1, 2, PAN: Hard left or right, 1kHz -70 dB Maximum Voltage Gain (1kHz) All VR are MAX when measured. PAN/BAL: panned hard left or hard right Rs=150©, INPUT GAIN: max MIC to CH INSERT OUT 60 dB MIC to ST OUT 76 dB MIC to REC OUT 58.2 dB MIC to MONITOR OUT 92 dB MIC to PHONES OUT 81 dB MIC to AUX SEND (EFFECT SEND*) 76 dB LINE to ST OUT 50 dB LINE to AUX SEND (EFFECT SEND*) 47 dB ST CH 7/8- (9/10**) to ST OUT 26 dB Rs=150© RETURN to ST OUT 12 dB Rs=600© 2TR IN to ST OUT 23.8 dB Phantom Voltage MIC 48 V Input HPF CH 1-2 and CH 3/4-5/6, 80Hz, 12dB/oct Input Equalization Turn over/ roll-off frequency of shelving: 3dB blow maximum variable level, +15,-15 dB maximum CH 1-2 and CH 3/4-5/6 HIGH: 10kHz: shelving MID: 2.5kHz: peaking LOW: 100Hz: shelving CH 7/8-(9/10**) HIGH: 10kHz: shelving LOW: 100Hz: shelving Internal Digital Effect* 16 prgrams, PARAMETER cotrol , Foot Switch (effect on/off) LED Level Meter Pre MONITOR leve 2x7 point LED meter (PEAK,+6,+3,0,-5,-10,-20 dB) PEAK lights if the signal comes within 3 dB of the clipping level. Power Supply Adaptor PA-10 AC 38VCT, 0.62A, Cable Length=3.6m Power Consumption 21 W Dimensions (WxHxD) 256.6mm x 62.2mm x 302.5mm Net Weight 1.6 kg (MG82CX), 1.5 kg (MG102C) Option Microphone Stand Adaptor (BMS-10A), Foot Switch* (FC5) All VR are nominal when measured. (Nominal position is adjusted to a position that is 6dB lower than the MAX position) Output impedance of signal generator:150ohms *: EFFECT exists only in MG82CX **: ST CH IN 9/10 exists only in MG102C Input specifications Input Terminals GAIN Actual Load Impedance For Use with Nominal Input Level Connector Sensitivitiy *2 Nominal Max. before clip CH IN MIC (1-2) -60dB 3k© 50-600© Mics -72dBu(0.195mV) -60dBu(0.775mV) -40dBu(7.75mV) XLR-3-31 type *3 -16dB -28dBu (30.8mV) -16dBu (123mV) +4dBu (1.23V) CH IN LINE (1-2) -34dB 10k© 600© Lines -46dBu (3.88mV) -34dBu (15.5mV) -14dBu (155mV) Phone Jack (TRS) *4 +10dB - 2dBu (0.615V) +10dBu (2.45V) +30dBu (24.5V) ST CH MIC IN (3/4, 5/6) -60dB 3k© 50-600© Mics -72dBu(0.195mV) -60dBu(0.775mV) -40dBu(7.75mV) XLR-3-31 type *3 -16dB -28dBu (30.8mV) -16dBu (123mV) -6dBu (389mV) ST CH LINE IN (3/4, 5/6) -34dB 10k© 600© Lines -46dBu (3.88mV) -34dBu (15.5mV) -14dBu (155mV) Phone Jack *5 +10dB - 2dBu (0.615V) +10dBu (2.45V) +30dBu (24.5V) ST CH IN (7/8, 9/10 *7) - 10k© 600© Lines -22dBu (61.5mV) -10dBu (245mV) +10dBu (2.45V) Phone Jack *5 RCA PiN Jack CH INSERT IN (1-2) - 10k© 600© Lines -12dBu (195mV) 0dBu (0.775V) +20dBu(7.75V) Phone Jack (TRS) *6 RETURN [L,R] - 10k© 600© Lines - 8dBu (308mV) +4dBu (1.23 V) +24dBu(12.3V) Phone Jack *5 2TR IN [L,R] - 10k© 600© Lines -22dBV (79.4mV) -10dBV (0.316V) +10dBV(3.16V) RCA Pin Jack *1 0dBu is referenced to 0.775Vrms. 0dBV is referenced to 1Vrms. *2 Sensitivity is the lowest level that will produce an output of +4dB(1.23V), or the nominal output level when the unit is set to maximum level.(all faders and level controls are at maximum position.) *3 XLR-3-31 type connectors are balanced.(1=GND, 2=HOT, 3=COLD) *4 Phone jacks are balanced.(Tip=HOT, Ring=COLD, Sleeve=GND) *5 Phone Jacks are unbalanced. *6 Phone Jacks are unbalanced.(Tip=Out, Ring=In, Sleeve=GND) *7 ST CH IN 9/10 exists only in MG102C Output specifications Output Terminals Actual Source Impedance For Use with Nominal Output Level Connector Nominal Max.Before Clip STEREO OUT [L,R] 150© 10K© Lines +4dBu (1.23 V) +20dBu(7.75V) Phone Jack *2 AUX SEND (EFFECT SEND *4) 150© 10K© Lines +4dBu (1.23 V) +20dBu(7.75V) Phone Jack *2 CH INSERT OUT (1-2) 75© 10K© Lines 0dBu (0.775V) +20dBu(7.75V) Phone Jack *3 REC OUT [L, R] 600© 10K© Lines -10dBV (0.316V) +10dBV(3.16V) RCA Pin Jack MONITOR OUT [L, R] 150© 10K© Lines +4dBu (1.23 V) +20dBu(7.75V) Phone Jack *2 PHONES OUT 100© 40K© Lines 3mW 75mW Stereo Phone Jack *1 0dBu is referenced to 0.775Vrms. 0dBV is referenced to 1Vrms. *2 Phone jacks are impedance balanced.(Tip=HOT,Ring=COLD,Sleeve=GND) *3 Phone Jacks are unbalanced.(Tip=Out, Ring=In, Sleeve=GND) *4 EFFECT SEND exists only in MG82CX

Yamaha MG82CX @ Electro Music.
Price: £156.00.